Diferència entre revisions de la pàgina «Accelerant l'arrencada d'Ubuntu»
De Wiki d'en Jordi Binefa
(Es crea la pàgina amb «=== Escurçant el temps d'espera a 30 segons a l'arrencada i a l'apagada. === ecat@ecat-USB:~$ sudo nano /etc/systemd/system.conf #DefaultStandardError=inherit Defa...».) |
(→En cas d'haver mogut la partició swap haurem d'actualitzar /etc/fstab) |
||
Línia 45: | Línia 45: | ||
/dev/sda1: UUID="2ff03269-4773-45af-a907-922fcd7b33f5" TYPE="ext4" PARTUUID="de179c0b-01" | /dev/sda1: UUID="2ff03269-4773-45af-a907-922fcd7b33f5" TYPE="ext4" PARTUUID="de179c0b-01" | ||
/dev/sda2: UUID="14e26a88-79d4-45a3-a690-b8238b84d320" TYPE="ext4" PARTUUID="de179c0b-02" | /dev/sda2: UUID="14e26a88-79d4-45a3-a690-b8238b84d320" TYPE="ext4" PARTUUID="de179c0b-02" | ||
− | /dev/sda5: UUID="<u>'''f0a7c743-d812-463c-8f9a-2d004a26a9c4'''</u>" TYPE="swap" PARTUUID="de179c0b-05" | + | /dev/sda5: UUID="<u>'''f0a7c743-d812-463c-8f9a-2d004a26a9c4'''</u>" TYPE="<u>'''swap'''</u>" PARTUUID="de179c0b-05" |
Revisió de 17:59, 15 gen 2018
Escurçant el temps d'espera a 30 segons a l'arrencada i a l'apagada.
ecat@ecat-USB:~$ sudo nano /etc/systemd/system.conf
#DefaultStandardError=inherit DefaultTimeoutStartSec=30s DefaultTimeoutStopSec=30s #DefaultRestartSec=100ms
Posar /tmp a la memòria
ecat@ecat-USB:~$ cat /etc/fstab
# /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=82debb93-e177-4f55-86ca-abfbbc17bbec / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=f0a7c743-d812-463c-8f9a-2d004a26a9c4 none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,nosuid,nodev,exec,mode=1777,size=1024M 0 0
Fixeu-vos a la darrera línia tmpfs. La mida és en aquest cas de 1024M
En cas d'haver mogut la partició swap haurem d'actualitzar /etc/fstab
ecat@ecat-USB:~$ cat /etc/fstab
# /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=82debb93-e177-4f55-86ca-abfbbc17bbec / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=f0a7c743-d812-463c-8f9a-2d004a26a9c4 none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,nosuid,nodev,exec,mode=1777,size=1024M 0 0
Fixeu-vos a la UUID de la penúltima línia swap
Amb l'ordre blkid podeu verificar si és la UUID que li correspon. En cas contrari haureu d'editar /etc/fstab fent sudo nano /etc/fstab
ecat@ecat-USB:~$ sudo blkid
/dev/sda1: UUID="2ff03269-4773-45af-a907-922fcd7b33f5" TYPE="ext4" PARTUUID="de179c0b-01" /dev/sda2: UUID="14e26a88-79d4-45a3-a690-b8238b84d320" TYPE="ext4" PARTUUID="de179c0b-02" /dev/sda5: UUID="f0a7c743-d812-463c-8f9a-2d004a26a9c4" TYPE="swap" PARTUUID="de179c0b-05"